Cruisers Forum
 


Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 14-01-2022, 19:36   #1
Registered User

Join Date: May 2009
Location: Belfast, Maine
Boat: Morgan, OI, 33'
Posts: 158
Images: 1
C&C parts

Mast*(35'8”)($1500) $500 (w/base plate, winches & spreader n lights),
Boom with mainsheet tackle $100
Mainsail*&*jib*$75 I wouldn't*race*with it, but it'll get you going.
A4 gas*Engine*long block w/ dist,*fuel pump*$100, Carbureter ($100) $50, Starter alone ($209) $80,*Alternator*alone ($86) $50,*Engine*water*pump">raw*water*pump alone ($125) $80, Cylindrical Monel*Fuel tank*($580) $75
Engine with carb, starter,*alternator*&*water pump*$250

Holding tank*($262) $50, Ice box $50, Toe rail p&s ($650) $210, Water tank $25, Toilet with hose ($152) $75

Rudder*with post ($1600) & re-inforced tiller ($160) & rudder/tiller post hinge/bracket $200 for all.

Winches*Barient*12 & 16 ($100/$160) $50/$75, Cleats($18) $10, Chain plates no*corrosion*$10ea, backstay chainplate $10, Stantion bases($38) $20,*Teak*hand rails ($130) $50in ea/$90ext ea, Thru hulls($100) $10,

Fwd*hatch*($680) $100,*Solar*vent ($50) $20,*Portlights*2 large n 2 small with frames ($80/$40)(new plexi n seal) $300 for all 4.

Rear running light fixture with bulb $5,*Deck*Water fill $10,*Bronze*thru hull*with taper*plug*shutoff $25, Pair*deck*fittings with air scoops $5, 6" snap-in*inspection*ports*$5 ea
Vineer ply locker doors with hinges $5ea,*Salon*fold down table with brackets $35,

Most of the*interior*teak: Teak "U" strips to cover*plywood*edges, shelf/bunk supports & many more pieces for making plugs or other small projects $25 for the lot.

V berth foam cushions $25, 2 Cockpit seat cushions $25,
Lifeline set (new) $250
Disailor is offline   Reply With Quote
Old 14-01-2022, 20:00   #2
Registered User
 
Opie91's Avatar

Join Date: Apr 2009
Location: CT
Boat: C&C 34
Posts: 993
Re: C&C parts

What C&C model?
Opie91 is offline   Reply With Quote
Old 15-01-2022, 17:19   #3
Registered User

Join Date: May 2013
Location: Ontario
Boat: Cabot 36
Posts: 35
Re: C&C parts

Can you provide some dimensions for the lifelines? Depending upon length and configuration, I might be interested in them. Thanks.
F27Firefly is offline   Reply With Quote
Old 16-01-2022, 12:44   #4
Registered User
 
Opie91's Avatar

Join Date: Apr 2009
Location: CT
Boat: C&C 34
Posts: 993
Re: C&C parts

Also could I get a picture of the forward hatch with dimensions? If it is the same as mine ill take it.
Opie91 is offline   Reply With Quote
Old 16-01-2022, 20:21   #5
Registered User

Join Date: May 2009
Location: Belfast, Maine
Boat: Morgan, OI, 33'
Posts: 158
Images: 1
Re: C&C parts

Opie 91
I believe it was a M2
Disailor is offline   Reply With Quote
Old 17-01-2022, 08:37   #6
Registered User
 
Opie91's Avatar

Join Date: Apr 2009
Location: CT
Boat: C&C 34
Posts: 993
Re: C&C parts

Quote:
Originally Posted by Disailor View Post
Opie 91
I believe it was a M2
M2, do you mean Mark 2?

How many feet long was the boat? What year? Do you have the Hull Number for the boat?

These answers will help sell the parts.
Opie91 is offline   Reply With Quote
Old 17-01-2022, 18:04   #7
Registered User

Join Date: May 2009
Location: Belfast, Maine
Boat: Morgan, OI, 33'
Posts: 158
Images: 1
Re: C&C parts

It is a 27' 1974 C&C Hull #270457.
Disailor is offline   Reply With Quote
Old 18-01-2022, 18:22   #8
Registered User

Join Date: May 2009
Location: Belfast, Maine
Boat: Morgan, OI, 33'
Posts: 158
Images: 1
Re: C&C parts

Hatch opening in the deck is 19" x 19". It'll take some doing to separate it from the piece of deck it was mounted on, but it's on my ToDo list.
Need your email address to send photos.
disailor@sover.net
Disailor is offline   Reply With Quote
Old 18-01-2022, 18:41   #9
Registered User

Join Date: May 2009
Location: Belfast, Maine
Boat: Morgan, OI, 33'
Posts: 158
Images: 1
Re: C&C parts

Quote:
Originally Posted by F27Firefly View Post
Can you provide some dimensions for the lifelines? Depending upon length and configuration, I might be interested in them. Thanks.
There are 4 of them & all at 22' 11". Jaw toggle at one end & pelican hook on the other.
They are new, never installed.
Will need your email to send photos.
DC
Disailor is offline   Reply With Quote
Old 18-01-2022, 18:44   #10
Registered User

Join Date: May 2009
Location: Belfast, Maine
Boat: Morgan, OI, 33'
Posts: 158
Images: 1
Re: C&C parts

Quote:
Originally Posted by F27Firefly View Post
Can you provide some dimensions for the lifelines? Depending upon length and configuration, I might be interested in them. Thanks.
There are 4 of them & all at 22' 11". Jaw toggle at one end & pelican hook on the other.
They are new, never installed.
Will need your email to send photos. disailor@sover.net
DC
Disailor is offline   Reply With Quote
Reply

Tags
parts

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Airmar "Transom&q uot ; style triducer does not give wate Franziska Marine Electronics 3 04-10-2021 12:45
For Sale: Cruising Guides FL, Abaco & Exumas dworkman General Classifieds (no boats) 0 12-04-2020 12:34
Have boat & need parts OR Have parts & need buyers? CatBoatDoug Our Community 0 22-11-2016 06:30

Advertise Here


All times are GMT -7. The time now is 15:21.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.