I'm installing a SureCal Calorifier
. It's a 30L horizontal tank, with an expansion and accumulator tank. I've successfully installed the system with PEX tubing and SharkBite fittings, with a shut off valve at the cold water
intake for the clarifier (that is currently shut off). Reason being, that while I've got hot water
lines run and properly plumbed, I can't figure out how to wire the darn thing. Here's the instructions I've found online, but it's not clear enough to me how to do this. My experience with wiring
is primarily using ANCOR duplex wire for LED cabin
lights - nothing this complicated, and nothing involving this many wires or connections.
Any clarity anyone can provide is greatly appreciated! I also have an inline pressure gauge, and would love any input as to where in the system this would be best to install! Either on the cold water line, or on the hot water output line? I don't know what's the best location for this, so your assistance in determining it's spot is greatly appreciated. Happy to post pictures this afternoon if it would help. Thank you!