Steering Wheel Adapter

[dohenyboy]

I have a problem that I need some advice on
my steering pump has a 3/4 tapered shaft
I need a 32 " wheel- "destroyer" style. I cannot find one new, at any reasonable price, that fits on a 3/4 tapered shaft--they all come with 1"
I would have a sleeve machined but the bolt is not long enough for a nut to fit on, with a 1" shaft wheel. I need an adapter or a source for a wheel. I found one, used, but I need another one for the other station
thanks in advance

[Blue Stocking]

Doesn't Edson make these adaptors?

[GordMay]

Destroyer Wheels for Powerboats : Edson Marine Store

The problem appears to be cost.

[Blue Stocking]

My old Edson catalog K-25 shows a 3/4" taper to 1" parallel adaptor as Fig 698, on page 26.
May still be available.

[dohenyboy]

thank you
I set an email to edson to see if its still available