hey there forumites!
just pulled Rhosyn Mor out of the water
, I appear to have patches of small paint blisters
( none of them more than 1/4 inch across). I have had conflicting sets of opinions as to what to do with them; the first school
is to do nothing, give the bottom a light sanding
and then just bottom paint
over them , the seciond is to grind out all the blisters
, barrier coat and then paint
. Thesse are definateley paint blisters, I checked about a dozen of them, and they are not on the gelcoat/ substrate.. So my preference is to sand the hull
with 80 grit and paint... any opinions would be much appreciated..