Sealing plywood after fairing - Interprotect 2000e?

[Fore and Aft]

Chowdan our head is all plywood with coves in every corner and a fibreglass floor. Then coated with epoxy resin, two part International epoxy paint and then international Toplac paint. Four years later it still looks pretty good.
Cheers

[s/v Jedi]

Originally Posted by zstine

Personally, I think Interlux 2000 is too thick and hard to go directly on wood. I'd use a thin epoxy that will soak into the wood and hot-coat it with a thickened mix after

Well, you can thin it. I’m sure they will sell a special thinner for it, but I used Awlgrip brushing thinner and that worked great.