Replacement part for the Racor 200 fgm fuel/water separator

[Tmacmi]

In the process of trying to remove the drain plug I cracked the entire bowl.

Does anybody know the current replacement model? The engine is a yanmar 2 qm15.

I'm stuck at the dock and scrambling to find the replacement.

Thank you,

Tmacmi

[chris mac]

I'm not sure on your model, but I just ordered a replacement for mine on amazon

Originally Posted by Tmacmi

In the process of trying to remove the drain plug I cracked the entire bowl.

Does anybody know the current replacement model? The engine is a yanmar 2 qm15.

I'm stuck at the dock and scrambling to find the replacement.

Thank you,

Tmacmi

[tkeithlu]

The one you want is probably on this page:
https://www.eastfilters.com/products...ator-Bowl.html

The manual for your model is available here:
https://www.marinedieselbasics.com/r...ilter-manuals/

Any chance you can seal the crack and get back on the water?

Good luck with it.

[Tmacmi]

Originally Posted by tkeithlu

The one you want is probably on this page:
https://www.eastfilters.com/products...ator-Bowl.html

The manual for your model is available here:
https://www.marinedieselbasics.com/r...ilter-manuals/

Any chance you can seal the crack and get back on the water?

Good luck with it.

Thanks for the reply. No chance to repair the crack. Its extensive.

I spent time on the phone with a Racor technical guy. They were fantastic to work with. They don't make my model any more or any replacement parts for it.

I had to replace the whole thing. The replacement is

https://ph.parker.com/us/en/marine-f...pin-on/230rmam

Its a smaller diameter than the old one, which will make it easier to install but it is about 3 inches longer than the old one. So we'll see.

I'm hoping I can get this done on Friday.