Pearson 35 standing rigging dimensions

[Cyrus Safdari]

Does anyone happen to,know the original dimensions (diameter, length) of the standing rigging on Pearson 35s? I can't quite make it out on this image and I'm not sure my spars are original, certain standing rigging isn't.

[hlev00]

Sorry this isn't answering your question and is more along the lines of unsolicited input, but you might want to reach out to rigger with a good reputation in your area. They might have access to the information you are seeking and provide input on what you have an what might need to be replaced. Depending on your plans for usage, and of course the condition of the rig, an all at once replacement isn't necessarily required. You could do it over a few years. Of course if you feel like you need to replace the mast, well then it is all at once.

[ramron67]

I have a similar rigging question.
My P-35 (hull#373) was originally a yawl but a previous owner removed the mizzen mast.
I am considering putting the mizzen mast back on.
Does anyone have a P-35 yawl?