kubota/Entec generator Control Panel Replacement

[avazquez]

I have a 12 year old Entec/Kubota generator that runs very well and has no oil leaks. A bit noisy but runs fine. The control panel for the engine portion is Entec but that company no longer exists. It only has alarms which were mostly bypassed by the previous owner, no gauges, just lights (high temp..etc.). The engine is a Kubota two cilinder and runs at 3600 rpm. I would like to replace the control panel and associated wiring. If possible with one that has gauges etc. Any Suggestions?, Has anyone done this?