Identify this pump

[Randyonr3]

rebuilding or replacing the origional bilge pump. I'd like to rebuild due to the hole cut to fit the pump..
Can anyone identify this pump.. it has a "P" on the top of the cap. no other markings..
It is a manual pump.. click on picture to inlarge

[Cheechako]

Trying to remember that logo.. Plastimo?

[Jason Flare]

It is Plastimo. Haven't been able to find that particular pump. Still searching.

[Nicholson58]

Try Wolf's Marine in Benton Harbor, Michigan. Home Page

They have a lot of NOS & discontinued stuff. Call & send a photo. You might get lucky.

[Jason Flare]

Here is the Plastimo website. Plastimo

Bilge pumps are on pages 396 through 406.

I see similar pumps but I don't see your pump.

[Randyonr3]

looks like it might be a plastimo.... probably an early version with a duel action.. I'll call them in the morning... thanks

[seebq]

I know this post was from 2015, but just curious, I have a Beneteau First 285 with a Plastimo bilge pump and have the same issue, a nice cutout for a discontinued pump.

Any luck with a replacement? I would like to try a Gusher or Urchin, but I am afraid the cutout won't match:





Thinking of trying the Whale Gusher Urchin Manual Bilge / Waste Pump:

Whale Gusher Urchin Manual Bilge / Waste Pump

What did you end up doing for your replacement?

[GordMay]

Greetings and welcome aboard the CF, seebq.

[svHyLyte]

Originally Posted by Randyonr3

rebuilding or replacing the origional bilge pump. I'd like to rebuild due to the hole cut to fit the pump..
Can anyone identify this pump.. it has a "P" on the top of the cap. no other markings..
It is a manual pump.. click on picture to inlarge

Randy--

That's a standard Plastimo manual bilge pump presumably pulled from you starboard stern locker. Valves and the diaphragm are (or at least were) still available from Plastimo and, potentially, through BeneteauUSA (call Ward Richardson).

FWIW...

PS: Are you still in the Land of Fruits and Nuts?