Delaminating plywood under deck in forward cabin

[LittleWing77]

Originally Posted by Bill O

Similar to others would probably not rip it out and do the fix without messing up the finished side.

...You need to identify where the water is coming from and attempt to eliminate the problem. If not, eventually you will need to replace that piece. Is it coming from you anchor locker...?

This is where my mind went, too.

All the suggested fixes have been great, eh?

Good luck!
LittleWing77

[gonesail]

Originally Posted by Theplaceoflost

I have decent access to the underside so I think I will inject epoxy and screw upwards into the teak to hold while it sets.

might be good to thicken the epoxy a bit .. so it will stay in place.