I have an old Goiot
roller furel that the foil is cracked vertically inside one of the channels .
Two cracks ; one is about 20cm(8 in ~) and another about 10 cm ( 4 in ~) long
I tried to epoxy
them with special epoxy
for the metal( the one they use on motors) but the epoxy cracked after i have undone the holding tools.
i can't hoist any sail because the swivel get stuck where the crack is( because of the crack the part is larger) .
I will probobly cut the roller furler
of the headstay and switch back to hank on.
Before i do this, are there any way to repair it that i didnt think of ?
PS:new foils are not an options, discontinued long ago