Over the years the silicone and
paint has built up over the outer gaskets on my windows and feel it is time to remove the old gaskets and replace them. Some of them leak slightly but I figure if I'm going to do a few I might as well do them all. The
interior part of the
gasket seems to be in good shape but I'm not sure if it's all one piece or not. Is the window sandwiched between two separate gaskets or is it one piece that wraps around the window and then fits into the space. I'd like to find a distributor for the gaskets because I live in the USVI and I'm almost certain I won't be able to find anything down here so it's imperative that I get the proper materials before I start taking these old gaskets off the windows. Any help is appreciated.
Sent from my
iPad using Cruisers Sailing Forum
Linear Mode
Recent Discussions