Looking for some advice
on integrating the sensor information from my VW Marine
TDI 150-5 (same as mercury marine
TDI 150-5) NMEA 2000
Saw part of an archived thread that is inaccessible to me on marine diesel https://boatdiesel.com/Forums/Misc-M...-NMEA-2000.cfm
about using Actisense EMU-1 or J1939 to NMEA
2000® network gateway but wondered if anyone has some actual experience with this?
Also wondering where connection in is physically made (behind control panel
or on engine) and connector type.
Thanks for any help.