On Friday, I successfully removed my Ford Lehman
2412E (1100 pounds) from the boat
, while the boat
was still at dock
in the marina. I searched long and hard for information on how to do this, but only found references
to small engines or boatyard+crane. I don't have a small, lightweight engine
, and there were confounding issues to in situ
disassembly and/or boatyard+crane.
So I built a three-legged jib
gantry to remove the engine
, and then transfer to the dock. This is the meat of my solution to the problem: https://www.svcascadia.com/2020/06/r...-still-in.html
I hope this information can help someone who finds themselves in a similar spot. I'm happy to answer any questions anyone might have.