Perkins Prima M50 Workshop Manual

[Quintessa41]

Hi guys does anyone have a workshop manual for the Perkins Prima M50 engine.
I know this has asked before but I just can’t find anything on the net . Any help would be much appreciated. Cheers Dave.👍

[SY Marelot]

Dave,



Im currently replacing fresh-water pump on my Prima M50 and to my astonishment and horror, I just realized Ill have to strip off the timing belt, and other vital accessories. Thus, if you have a pdf-copy of that manual, I will be very grateful,



Thanks, - Marek

[a64pilot]

That isn’t uncommon on automotive motors, the Miata for example.
Most do the timing belt and water pump as a kit so to speak and reset the clock on the belt.
At least on car motors the idler pulleys are usually replaced with the belt too.

[Kyoko]

Hope this will help you out
It is the same engine

[Kyoko]

Hope this will help you out
It is the same engine

[Kyoko]

I could not upload thefile (to big)
but seasch the net for volvoworkshopmanualseries22enginerepair.pdf:

[skipperpete]

Originally Posted by SY Marelot

Dave,



Im currently replacing fresh-water pump on my Prima M50 and to my astonishment and horror, I just realized Ill have to strip off the timing belt, and other vital accessories. Thus, if you have a pdf-copy of that manual, I will be very grateful,



Thanks, - Marek

Hi SY Marelot
Yes , changing the waterpump on the Prima is a real pain and there are quite a few traps to be avoided, especially the injector pump timing. The timing pulley has to be removed and it has 2 keyways in it, make sure you mark the one that has the key in it. It takes about 4 hours to do the job and you can get the parts from parts4engines in UK. They sell the pump and gaskets as well as the timing belt and idler/ adjuster pulleys.
I only have a hard copy of the manual , sorry.