Perkins front bolt

[model 10]

Could somebody please tell me the size socket you need for the front bolt on the vibration damper/pulley of the Perkins 107-108?

[a64pilot]

Nobody knows?


Sent from my iPad Pro using Cruisers Sailing Forum

[SSgtPitt]

Sorry, not yet. But i do know the heat exchanger takes 1/2" and the exhaust manifold takes 9/16".

[model 10]

It would be great if someone with a Perkins could tell me if I need a 1 5/16" or what? My boat is in Guatemala and I am in the USA and I need to take a socket back with me so I can turn the engine over to check the fuel pump timing. The only thing I have now is a big Monkey wrench...

[Sailuke]

Originally Posted by Guy

I need to take a socket back with me so I can turn the engine over to check the fuel pump timing.

just take em all

[CS Cruiser]

crank shaft pulley retaining bolt 1½” standard socket for the 4.107 & 4.108

[model 10]

Originally Posted by CS Cruiser

crank shaft pulley retaining bolt 1½” standard socket for the 4.107 & 4.108

Thank you.