Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 25-08-2009, 16:28   #1
Registered User

Join Date: Mar 2006
Location: Buena Vista Colorado
Boat: S/V Pooka Com-Pac 27
Posts: 219
One More Question About the Little L90A Yanmar

How does the injector come out? I took the two nuts and plate off. The return line would hit the studs if turned. Do the studs come out first then it turns out? The studs only have threaded portion available to put a stud removal tool on.
__________________
S/V Pooka
Com-Pac 27
bmiller is offline   Reply With Quote
Old 25-08-2009, 20:36   #2
Eternal Member
 
Chief Engineer's Avatar

Join Date: Aug 2006
Location: North of Baltimore
Boat: Ericson 27 & 18' Herrmann Catboat
Posts: 3,798
With the supply and return line removed and the plate/nuts off it should pull out.

If it has been in there a while you may have to put some PB Blaster on the injector body....let it sit and tap slightly on one side then the other to loosen it. If you can get a pry bar under a lip you can gently use pressure/tapping to pop it out....just ake your time...don't go a wailin on it!!!!!!!!!!!!!!

When you put the injector back in...put some never seize on the body
Chief Engineer is offline   Reply With Quote
Old 26-08-2009, 04:08   #3
Registered User

Join Date: Mar 2006
Location: Buena Vista Colorado
Boat: S/V Pooka Com-Pac 27
Posts: 219
Thanks
__________________
S/V Pooka
Com-Pac 27
bmiller is offline   Reply With Quote
Reply

Tags
yanmar

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Member with Question about Yanmar Diesel calphi27 Engines and Propulsion Systems 31 19-07-2011 04:23
Yanmar Start Buzzer Question Sonosailor Engines and Propulsion Systems 4 04-02-2010 07:10
Yanmar L90A Injector bmiller Engines and Propulsion Systems 3 25-08-2009 12:34
YANMAR 2GM RPM / OVERPROPPED QUESTION Northeaster Engines and Propulsion Systems 9 27-07-2008 18:24
Yanmar cooling question Tropic Cat Engines and Propulsion Systems 5 04-07-2006 17:27

Advertise Here


All times are GMT -7. The time now is 04:07.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.