Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 08-05-2020, 16:32   #31
Registered User
 
Kurlie1's Avatar

Join Date: Mar 2010
Location: New Zealand
Boat: Bene Idylle 1050
Posts: 22
Re: It worked ... was it supposed to?

Thanks CJ. I am looking to get one of these. Just emailed them. Hope they ship to NZ?
__________________

Kurlie1 is offline   Reply With Quote
Old 08-05-2020, 18:29   #32
Registered User

Join Date: May 2016
Location: Hobart, Tasmania
Boat: Adams 12
Posts: 14
Re: It worked ... was it supposed to?

Kurlie, I expect that they will post to our cousins across the ditch (NZ) but just in case they donít get in touch with me and Iíll get one locally and then send it on. Oh and if you have any questions about installation, setup etc ( itís pretty straight forward though) again, happy to help. Cheers, Chris.
__________________

cjheath is offline   Reply With Quote
Old 08-05-2020, 22:15   #33
Registered User
 
Kurlie1's Avatar

Join Date: Mar 2010
Location: New Zealand
Boat: Bene Idylle 1050
Posts: 22
Re: It worked ... was it supposed to?

Thanks for the offer Chris. I have been in touch with Phillip Welch at Medex who is a fellow boatie and very helpful. He is organising a unit for me.
All very helpful suggestions here - a great forum
Kurlie1 is offline   Reply With Quote
Old 09-05-2020, 04:20   #34
Registered User

Join Date: Nov 2019
Location: Newcastle
Boat: Cruising yacht 37’
Posts: 16
Re: It worked ... was it supposed to?

Quote:
Originally Posted by Kurlie1 View Post
I have found another CF discussion on this topic.


http://www.cruisersforum.com/forums/...ms-219351.html.


Seems to suggest that it has been tested by Practical Sailor and is safe to use but not as effective as Rydlyme
Hydrochloric acid 50/50 mix with water,let sit in the engine 10/15 minutes max,rinse and repeat,good as gold.Flush with raw water.
Discovery 3 is offline   Reply With Quote
Old 09-05-2020, 10:54   #35
Registered User

Join Date: Jun 2013
Posts: 1
Re: It worked ... was it supposed to?

Hi ,
Had a similar problem with the same engine years ago .
To make a long story short it was a coked up Exhaust manifold that restricted flow and gave the impression that the brass exchanger was clogged up .
Worth checking ( we replaced the gooseneck type one for the straight through version .
End of problem . Hope this helps
__________________

Petrel04 is offline   Reply With Quote
Reply

Tags
work

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How am I supposed to wire Batteries properly? Ebtvision Electrical: Batteries, Generators & Solar 31 26-05-2016 10:05
My marina was supposed to wash my boat... Painted it too what would you do? PrairieBones Monohull Sailboats 108 18-05-2015 09:40
OpenCPN newbie--Is this the way the app is supposed to work? nestorph OpenCPN 2 16-01-2013 22:21
Really? Does Nobody Here Know What The Damned Thing is Supposed To Do? charliehows Propellers & Drive Systems 3 29-11-2012 20:10
How is this Supposed to Work ? aegean adrift Off Topic Forum 17 09-11-2010 08:34

Advertise Here


All times are GMT -7. The time now is 05:17.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.