Cruisers Forum

  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
Thread Tools Search this Thread Rate Thread Display Modes
Old 18-02-2010, 11:03   #1
Registered User

Join Date: Jan 2010
Location: "Awesome weather" Miami, Florida
Boat: 2006 Chaparral Signature 260
Posts: 21
Question Grinding Motor Noise - New Info....

Awhile ago I posted a strange gringing sound from the engine of my boat. Its a 2006 5.7l 300hp mercruiser in and the sound seems to be coming from the flame arrestor area near the throttle body. As i searched other forums, someone descibed the EXACT noise as:
"a very loud suction noise that varies with the rpm's (example: as I stop the boat and put it in neutral, the hissing is not as loud as when the engine is can hear the suction dissipate as the engine slows, but it never stops and is annoying and loud."

Thats my exact problem!! Is anyone familiar with the vacuum lines near the TBI? The motor runs fine throughout the RPM range but its loud and annoying. Sometimes she will stall when cold start but after she is warm, she idles fine. Any vac. experts?
makolab is offline   Reply With Quote
Old 18-02-2010, 16:24   #2
Registered User
Laidback's Avatar

Join Date: Jun 2007
Posts: 853
'Grinding' or 'gringing' or 'suction' noise , suggest take off aircleaner, check all the hoses for a hole/s, clean the filter element. Check the inlet manifold for cracks, loose nuts. (Unlikely that the manifold gasket is faulty - but it is possible, leave this check to the last)
Laidback is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Grinding Noise from Air Intake makolab Engines and Propulsion Systems 12 20-01-2010 08:33
Grinding fibreglass Weyalan Construction, Maintenance & Refit 57 10-11-2008 03:51
Any info on Lian Hua motor yachts? Roy M Powered Boats 0 21-08-2008 13:37
Looking for info about Nanni 4.110HE motor ribbony Engines and Propulsion Systems 8 01-01-2008 19:10

Advertise Here

All times are GMT -7. The time now is 08:04.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2023, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.