Usually able to get my questions answered with simple searches here but I can't find anything on this.
One of the punch list items that were found during the
survey on our new to us 31 Tiara was the lack of vent/overflow lines on the
fuel pumps. As I understand,this will vent
fuel from a ruptured
diaphragm to the carb instead of the
bilge. I have an idea where the vent port is on the
pump but not sure where to run it to on the carbs. Engines are 350 Crusaders w/q-jets. Anyone have a pic or a link to info that will id the correct place to run the lines to? Is the port the same as what is labeled as the canister vent line?
Thanks for any help...
Tom
Linear Mode
Recent Discussions