Z-Diffusion Boom on a 2004 Beneteau Cyclades 43.3 with missing reefing lines

[toddmurray]

I have a Z-Diffusion Boom on a 2004 Beneteau Cyclades 43.3 with no reefing lines. There is an outhaul line only, but I need to be able to reef this boat.
I want to re-install the reefing lines. Can these lines be fished through from the goose neck side back with a wire fishing tool? I'm not sure if there is a pulley inside the boom for reefing lines. I can't seem to find a diagram for this boom.
Don't know why the previous owner would have removed reefing lines.
Thanks in advance for any help.
Todd Murray
Whitby, Ontario

[boom23]

Use the outhaul line to pull the reefing lines you want. When they reach the end of the boom, you can move them, with a wire hook, to their correct location.

I hope this makes sense.

[toddmurray]

Great suggestion. Thank you.

[Gary Mc]

You will likely need to take the reefing line to a cabin top winch in order to get proper tension.

Good Luck