 |
|
10-01-2016, 09:49
|
#16
|
Registered User
Join Date: Jun 2009
Location: Back in San Diego after 7 years in Mexico
Boat: Cal39 MrkIII, 1982
Posts: 166
|
Re: Tarting up the salon ceiling?
Not the least expensive fix, but a panelized overhead, made up of separate upholstered panels, each attached using industrial strength Velcro to wood furring strips is another option. Panels can be easily removed for access to the underside of the coach roof and access to salon wiring. Panels are essentially door-skin covered with padding and upholstery material.
|
|
|
10-01-2016, 10:02
|
#17
|
Registered User
Join Date: Apr 2014
Location: Lancaster Co., PA/North East, MD
Boat: Watkins 27
Posts: 167
|
Re: Tarting up the salon ceiling?
"Vast expanse of white fiberglass"??
Sounds like my "not quite so vast" almond overhead.  Fully intend to place a few teak-ish battens across the top and call it good. As others have mentioned; easy clean, bright and make the cabin seem larger.
While darkish teak interiors are "salty",they seem (to me)to be almost cave-like and add a sense of confinement.Don't know about a flowered pattern overhead? Mightmake me a bit (more) nuts 
*IF* I were to gut my interior, I'd definitely go bare-bones othe overhead with an off-white paint; hardware exposed and all.
|
|
|
10-01-2016, 10:03
|
#18
|
Registered User
Join Date: Dec 2008
Location: SC
Boat: None,build the one shown of glass, had many from 6' to 48'.
Posts: 9,482
|
Re: Tarting up the salon ceiling?
A cheap solution! Some carpet tile. A little insulation and some sound dampening.
|
|
|
10-01-2016, 10:28
|
#19
|
Registered User
Join Date: Feb 2012
Location: Thailand and Laos
Boat: Bavaria 37 (2007)
Posts: 450
|
Re: Tarting up the salon ceiling?
__________________
"Be yourself, everyone else is already taken." - Oscar Wilde
|
|
|
10-01-2016, 10:30
|
#20
|
Registered User
Join Date: Apr 2014
Location: Lancaster Co., PA/North East, MD
Boat: Watkins 27
Posts: 167
|
Re: Tarting up the salon ceiling?
Eeeewww!
carpet?
|
|
|
10-01-2016, 10:40
|
#21
|
Registered User
Join Date: Apr 2006
Posts: 4,413
|
Re: Tarting up the salon ceiling?
Shiva has a single formed GRP headliner... above it are wiring conduits. This is easy to clean... and believe me... if you cook... you will have every surface inside the boat covered with a light coating of kitchen "stuff".
I don't find the slick grp off white headliner unattractive... no more so than a white ceiling... I do find most of the panel headliners tooo busy looking... mostly sticky from grease and something else to replace at some point. Hell no!
|
|
|
10-01-2016, 10:42
|
#22
|
Registered User
Join Date: Dec 2008
Location: SC
Boat: None,build the one shown of glass, had many from 6' to 48'.
Posts: 9,482
|
Re: Tarting up the salon ceiling?
Quote:
Originally Posted by deltaten
Eeeewww!
carpet?

|
I said cheap. You never know the OP's budget?
|
|
|
10-01-2016, 11:09
|
#23
|
Registered User
Join Date: Mar 2011
Location: PNW 48.59'45N 122.45'50W
Boat: Ian Ross design ketch 63'
Posts: 1,360
|
Re: Tarting up the salon ceiling?
Quote:
Originally Posted by Nicholson58
Home built steel 78 foot sloop in the yard has very high overhead. I can't reach it hands up. He has a large non-opening deck opening with a stained glass mosaic themed in flowers & nicely-nippled mermaids. It is surrounded by a back lighted stained glass shadow box. Sorry, no photos. An alternative might be to have the figure pole dancing around the mast.
|
Okay - I just spit my coffee all over the computer. Our bow berth has 6'8" headroom and I can't even reach the overhead lights. I've been wondering what to do with it, it's so cavernous. I'll get right on it and post pictures when finished!
|
|
|
10-01-2016, 12:16
|
#24
|
Registered User
Join Date: Apr 2015
Location: Lakeland, Florida
Boat: Irwin Citation 34
Posts: 246
|
Re: Tarting up the salon ceiling?
I replaced the overhead on my Irwin Citation with white wainscotting from home depot with teak strips to cover the joints at 3' intervals. It looks better than any production boat overhead I have ever seen with the exception of Cabo Rico.
|
|
|
10-01-2016, 12:26
|
#25
|
Registered User
Join Date: Feb 2007
Location: Live in Boise, boat is in the Rio Dulce
Boat: 56' CNSO Mikado Cutter Ketch
Posts: 367
|
Re: Tarting up the salon ceiling?
I removed the 3 layers of old ceilings, installed 3/4" furring strips so I could add insulation sheets and then finished with white T&G bead board. I am really happy with the results.
|
|
|
10-01-2016, 12:41
|
#26
|
Marine Service Provider

Join Date: Jul 2014
Posts: 6,056
|
Re: Tarting up the salon ceiling?
Quote:
Originally Posted by Captndave1
I replaced the overhead on my Irwin Citation with white wainscotting from home depot with teak strips to cover the joints at 3' intervals. It looks better than any production boat overhead I have ever seen with the exception of Cabo Rico.
|
I have thought of doing this too.
Please post photos or link to photos of interior if you have them.
|
|
|
10-01-2016, 12:42
|
#27
|
Marine Service Provider

Join Date: Jul 2014
Posts: 6,056
|
Re: Tarting up the salon ceiling?
Quote:
Originally Posted by Mikado
I removed the 3 layers of old ceilings, installed 3/4" furring strips so I could add insulation sheets and then finished with white T&G bead board. I am really happy with the results.
|
I have thought of doing this too.
Please post photos or link to photos of interior if you have them.
|
|
|
10-01-2016, 14:22
|
#28
|
Registered User
Join Date: Jan 2011
Location: Caribbean live aboard
Boat: Camper & Nicholson58 Ketch - ROXY Traverse City, Michigan No.668283
Posts: 5,164
|
Re: Tarting up the salon ceiling?
Our overhead (1984). 1/8 plywood with 1/32 inch textured faux leather; teak strips. We had to take it all down and paint due to yellowing with its age. Looks great now. Applied with more tiny screws than you can believe into wood stringers glued & screwed to the cabin top.
|
|
|
10-01-2016, 14:22
|
#29
|
Registered User
Join Date: Oct 2015
Posts: 6
|
Re: Tarting up the salon ceiling?
salon vs saloon
Actually, i suspect, either is correct. The word first appeared in print in French in the 18th century as salon, from the latin root for hall. But in the flexible spelling of the day soon often became saloon. Saloon and salon were used interchangeably in both French and English through the 19th century while saloon seems to have lost favor in French. For nautical purposes it referred to a large gathering room for first class passengers and in exactly the way we think of the French use of the word salon. But, with the US use of the word to mean a place for the working class to drink, salon returned to use, to distinguish it from such unsavory connotations. So currently, either is correct, and have both been used for over two centuries. Perhaps if you sail a Jeanneau or Beneteau salon is preferred.
|
|
|
10-01-2016, 14:35
|
#30
|
Registered User
Join Date: Jan 2011
Location: Cowichan Bay, BC (Maple Bay Marina)
Posts: 8,594
|
Re: Tarting up the salon ceiling?
Wait, for Stu, someone will figure out how many amps per hour are in the salon ceiling windows!
__________________
Stu Jackson
Catalina 34 #224 (1986) C34IA Secretary
Cowichan Bay, BC, (Maple Bay Marina) SR/FK, M25, Rocna 10 (22#) (NZ model)
|
|
|
 |
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Advertise Here
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
Vendor Spotlight |
|
|
|
|