Sugar scoop transom and rear hung dinghy?

[Lasivian]

So, i'm still in the "planning" stages and curious how these two things would work (or not work) together.

I'm guessing the best place to hang a dinghy would be at the aft. (I'm figuring I do NOT want to deal with removing and replacing a motor just to use the dinghy)

But that would get in the way of using a sugar scoop or swim platform when the dinghy is up. (IE, fishing on passages, which is a big reason I want to go cruising.)

#1 Am I right in my thinking?
#2 Is there some simple solution to this that I don't know about yet?

Thanks!

[ilenart]

Its pretty simple; the davits need to stick out far enough that they do not interfere with the sugar scoop and high enough to be out of the way. I find that I can still use the swim platform for diving and not bang my head on the dinghy. For ocean crossings I plan to have the dinghy upside down on the foredeck, with the engine hanging off the back. The davits should provide a nice lifting point for the outboard. However 80-90% of the time the dinghy and engine will be hanging off the davits. Thats a 3.1m alum RIB weighing 60kg with a 15hp weighing 45kg. For fishing you could probably mount a reel without a rod on the pushpit under the dinghy. Few pictures below. Hope this helps.

Ilenart.