Nicholson 31

[El Pinguino]

Originally Posted by Boxertwinjeff

Who did you hear that from? I believe this Nich 31 was built in England and sailed out here via Cape Horn, with stopping in BC & Canada
I did read a post somewhere of it being seen & talked about in Vancouver.
Where on the Hull is the Hull No. stamped? then it will be easy to trace.

The Chief Officer on the Amanda Miller in 1984ish ...

Seriously.... he was from Sydney, 900 years old give or take, and seemed to know quite a bit about yachts... heard elsewhere as well... can't remember where.

Edit....They may have only built the 32 in Oz.....

[nicholson31]

Originally Posted by Boxertwinjeff

Who did you hear that from? I believe this Nich 31 was built in England and sailed out here via Cape Horn, with stopping in BC & Canada
I did read a post somewhere of it being seen & talked about in Vancouver.
Where on the Hull is the Hull No. stamped? then it will be easy to trace.

ID plate with year built and hull #, should be located aft cockpit transom below tiller.
Nic 31's were built in Gosporte England, ship yard dates back to 1782.

[Boxertwinjeff]

Originally Posted by nicholson31

ID plate with year built and hull #, should be located aft cockpit transom below tiller.
Nic 31's were built in Gosporte England, ship yard dates back to 1782.

Thankyou for that...

[Boxertwinjeff]

Originally Posted by nicholson31

ID plate with year built and hull #, should be located aft cockpit transom below tiller.
Nic 31's were built in Gosporte England, ship yard dates back to 1782.

The Hull Identification No. is WNZ4980CA282

Cheers Jeff.

[Boxertwinjeff]

Originally Posted by nicholson31

ID plate with year built and hull #, should be located aft cockpit transom below tiller.
Nic 31's were built in Gosporte England, ship yard dates back to 1782.

Hi Mate, Could you help me, I am quite a distance from my boat at present, so cannot check, how many Anodes are there, and where do they fit on the a Nicholson 31? I need to get them fitted ASAP. Cheers Jeff.