Hi new to this so hope this is the way to add a new post in the Morgan site.
I have a o/i 416 cc
ketch on the hard in guaymas at this moment. I need to replace the
Bimini and plexiglass c/c covers and windows. What I am considering is using the s/s frame and making a hard top using frp or other polyester resin product for the top. i would like to get other peoples input and if they have plans I would buy them so I wouldn't have to start from scratch. Guaymas Mex is on the
Sea of Cortez and quite a drive from where I live in Ca. I will be redoing the top side non skid and leaning towards sand for the skid part. Has anyone found anything they would suggest that works better?
Projects I have done. replaced heads. replaced side
ports,
refrigeration.
flooring, carpeting, found a way to add counter space in
galley,
hatch lexan ect ect. boats are projects. :-)
A little about Morgan 416. I have owned mine since 2006 and sailed her from
San Diego Ca as far as
Columbia and back. She is a fantastic live aboard and does quite well off the
wind. Steady 5 to 8 kns in a good breeze. As most morgan owners will testify going up
wind is a challenge. I left S/D in Dec 2006 and returned 2013. I am now planning on retiring in
mexico and
living aboard her until age gets the best of me. So yes I do like the boat but as most of us wish she would point a few degrees higher.