Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 04-12-2022, 21:08   #1
Registered User

Join Date: Dec 2022
Location: Australia
Boat: Beneteau 57 2003
Posts: 2
Boxtron Furler Error Leds On Control Unit

Hi All,

I have been sailing error free with my electric BAMAR Furler and it has decided to cease to play.

Both Furl / Unfurl fail and a "Click" sound occurs up at the controller.

I have reset the breaker and the unit goes through initialisation and these two LEDS stay lit, so I am assuming the unit is not happy about something. (See attachment)

Can anyone give me some clues on what I can test / reset / replace or ?

Clive
Attached Thumbnails
Click image for larger version

Name:	20221202_195443.jpg
Views:	14
Size:	424.4 KB
ID:	268342   Click image for larger version

Name:	Bamar Electric Jib.jpg
Views:	12
Size:	387.4 KB
ID:	268343  

LANDOFPLENTY is offline   Reply With Quote
Old 04-12-2022, 22:19   #2
Registered User

Join Date: Oct 2021
Posts: 406
Re: Boxtron Furler Error Leds On Control Unit

Out 3 and 4 should light one at a time when a command is active, one of them at furl, the other on the way out. Both on could be a short in the radio remote, or something wrong in the Boxtron.

Maybe power off the remote? If the outputs stay on likely a problem in the Boxtron.

Quote:
•RADIO ON Green LED on when the receiver is connected to BOXTRON®, plug inserted and BOXTRON® battery cut-out on “ON position”.
• OUT3-OUT4 Yellow LEDs indicate the functions of the channels entering the radio-control device. The function lights up when the button on the radio control transmitter is pressed. The receiver picks up the signals sent by the transmitter
HeywoodJ is offline   Reply With Quote
Old 04-12-2022, 22:44   #3
Registered User

Join Date: Dec 2022
Location: Australia
Boat: Beneteau 57 2003
Posts: 2
Re: Boxtron Furler Error Leds On Control Unit

Thanks very much for the prompt response.
As an FYI, the unit is hard wired to a toggle button on the helm.
I will head down to the boat this week and let you know how I go.
LANDOFPLENTY is offline   Reply With Quote
Old 05-12-2022, 01:59   #4
Registered User

Join Date: Dec 2013
Location: Italy
Boat: Jeanneau 57
Posts: 61
Re: Boxtron Furler Error Leds On Control Unit

Instructions here: http://www.bamarusa.com/wp/media/um_boxtron.pdf
Loredo is offline   Reply With Quote
Reply

Tags
furler

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error in Index Error calculation in Celestial Navigation plug-in MarkN OpenCPN 7 25-04-2020 10:33
MAIN POWER Error Msg ST-7000 Control Unit sher9016 Marine Electronics 0 03-05-2015 11:02
LEDs / Halogen Lights beau Construction, Maintenance & Refit 51 17-09-2010 08:58
LEDs and wood ShadowRWolf Monohull Sailboats 19 15-12-2008 05:39

Advertise Here


All times are GMT -7. The time now is 00:01.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2023, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.