Perry/YMTanton exchange on Alum. PH Cutter 1993

[pschwenn]

Yacht Design fans and Sailing Magazine readers and ...,

I read (in a 1993 Sailing Magazine issue some time ago an exchange between R. Perry and YMTanton, in which it's asked (and answered): what was the inspiration for a 67' Aluminum Pilothouse Cutter then (1993) under construction. I'd like to have a chance to look at that text, but 1993 back issues are more or less unobtainable and googling hasn't turned it up.

The exchange quite possibly is NOT in a Perry Review of the Cutter in question - it could be in a review of another boat or in some other article by Perry.

Perhaps someone has or could copy the text. Or knows which issue it's in.

OR, someone knows a place other than in a 1993 Sailing Magazine where this particular exchange takes place. (There are several other exchanges there and about on other aspects of this boat.)

Thank you,

[hpeer]

Bob is active on facebook.

Maybe ask there.