Ordering an ePropulsion Spirit 1.0+. Looking for feedback on the XS versus S shafts for a small flat bottom
dinghy. I have the Achilles LSI260 (8,6") air floor
dinghy. Per the below link they recommend the XS up to 15.7" transom height. Mine is 14" so it would be within spec for the XS. Concern is that the blades of the 11'' prop are going to be very close to the
water surface. We do venture into the shallow with the dinghy so do not want to add the additional 4" of depth/draft for the S if the XS will do well.
Appreciate all feedback, thank you in advance.
https://www.epropulsion.com/post/mea...-shaft-length/