Recommended Settings for NEW install 9/2020

[Steve_C]

I have just finished my installation of 800AH at 24 volts using 64 100AH Cells. I have temporarily switched my efforts to an RV for the foreseeable future until the COVID situation becomes more travel-friendly.

I am using two Victron Multiplus 24/3000 inverters. I am using an Orion Jr. 2 with CAN for a BMS. I have a Victron Cerbo as well as 1880 watts of Solar running thru two Victron Solar Controllers. I am about to fire everything up and do the initial settings.

I would REALLY appreciate some recommendations for the System settings for the Multiplus Inverter/Chargers as well as the BMS. I have been going back thru the older posts and noticed that recommendations have been changing as people get more experience and time with their systems. At any rate its not easy to find a clear current recommended setting.

Thanks for any help!