LFP's Charging Voltage and State of Charge

[john61ct]

All good.

Any measures to prevent a "memory effect"?

[john61ct]

doops

[john61ct]

Wanted to save this charge profile, here seems good a place as any



Idea is for fast rate charging say 0.5C at 25°C

set bulk charge voltage a bit higher say

3.55Vpc rather than normal 3.45Vpc

start dropping current at say 3.35Vpc, so that by the time your setpoint is hit, current is not much higher than your desired endAmps, say 0.05C

Can of course continue CV to the mfg spec defined 100% endAmps, if doing a BM benchmark, cap test or something.