10’ Trinka – Manufactured by Johannsen Boat
Works, Vero Beach, FL
is located in the Middle Keys in Florida
. There is no trailer
available. Buyer must arrange to pick up the dinghy
We purchased this Trinka new in 2000 and used it as a tender
to our Grand Banks trawler
. Over the years we have had other boats that did not require a tender
and during those times we kept the dinghy
. Recently we sold
our Eastbay and the new boat
cannot accommodate the Trinka. The boat, motor
, boat cover, oars and the accessories are in excellent condition.
Beam: 54 in.
: 4 in to 28 in
Height: 27 in.
Weight: 130 Lbs.
Capacity: 4 persons or 550 Lbs.
, rowing, and sailing yacht tender built for rugged cruising service
Hand-laid fiberglass hull
, finished with gelcoat
inside and out, wine glass transom, plumb bow. Teak
trim provides an inner and outer rail around gunwales, reinforces the transom. The forward and aft seats are fiberglass
, providing a watertight flotation.
Additional items include teak
floorboards, bronze hardware
, stainless steel
protective molding on transom, forefoot and skeg, stainless steel
3/8" heavy off-shore towing eye with extra reinforcing, bronze
drain. Sunbrella fabric
boat cover. Fully equipped to row, sail, or motor.
- 7 ft. oars, bronze oarlocks and leathers, 2 pair bronze oarlock sockets, bronze oar clamp
- Complete sail kit includes a 2-piece aluminum
, unstayed mast
and boom, UK Dacron Sail, rudder
and tiller with hiking stick, dagger board, and all running rigging
- Yamaha 4 cycle 2.5 HP engine
– less than 40 hours running time.
Send me a private message if you need any additional information or if you would like additional pictures.