Have you had problems with the common mercury
tilt switches to control your bilge
pumps? I've been thru lots of them, until I found this! I've used this product now for 10 years. Never had a failure. I have 3 - one for the main bilge
, and one in each shower
bilge. It's not just the float switch that's unique, but the controller.
It's programmable. So, for example, if you can't put the float at the bottom of the bilge, you can tell it to start the pump
and run for X time after the level has dropped, so you still empty the bilge!
How about knowing how many times it switched on while you were away from the boat
- it tells you! High water
, low water
, separate alarms, whatever you want.
Check it out HERE
Also many other bilge and tank control systems up to 32 tanks/bilges Have a look!