Hello,
I have a
Victron Blue
Power Panel and a V.E.Net
Battery controller on the house bank for a year now.
I have a Morningstar TS-60
MPPT solar charge controller connected to the House bank. I have the Morningstar
remote meter connected to show the voltage of the house bank and the amps coming in.
Both were connected on the same day the new system was energised !
Things have been working flawlessly for a year. Both the MorningStar and BPP have shown the identical voltage of the house bank.
NOW (after about 17 months)... The BPP is showing a reading of 2 volts lower.
The Morningstar voltage and a multi-tester check, show the Morningstar is correct.
The connections are all good and shiny at the bus bars.
Why would the BPP have a reading 2v lower difference ?
Could the V.E.Net
Battery Controller cause this ? It seems odd !!!
My clamp on amp tester confirms the BPP is displaying correct amp readings, and in sync with the Morningstar display when everything else is off.
Alan