Hey guys, I wonder if anyone here has experience with
Victron BMS 12/200 that can give me some guidance.
I am trying to hook up the BMS 12/200 with a
single Victron Lithium battery.
In the image, the two thick black and red wires connect to
battery terminals. The thin white and red wires are from
shore power transformer. The two red wires are connected, and the thin white wire goes to BMS load minus post. Voltage between battery terminals measures 13.1V, and voltage from transformer is 13.6V. I would expect the
charging indicator LED of BMS to come on, but it stays off.
Any suggestion on what to check? Thank you.