Hi all!
I bet some of you have successfully installed and configured on of those generic analog to NMEA2000 converters (amazon link to what I am referring to below - these seem to be all relatively the same/different brands, similar
price range around $100-$150).
My request is for someone to share the configuration process...
My
engine:
Volvo Penta D2-55 (will be used to
rpm, temp, etc).
Results to be visible on a
chartplotter (NMEA2000).
Thank you!
https://www.amazon.com/NMEA2000-Conv...s%2C148&sr=8-2