440: Saloon sliding door rollers

[coldar1]

Hi guys,

Anyone else experienced a L440 (mine is a 2006 build) saloon sliding door with flat spots on both rollers. Seems the previous owner may have allowed the rollers to become seized over time. We now have them rolling, but I can't find the Lagoon supplier or alternatives to replace mine.
Thanks in anticipation of positive feedback.

Coldar1

[Aupalukii]

Hello,
I need to change rhe roller on my door this summer...
Maybee youncan find what you need there....

roulette chariot simple reglable achat roulettes inox doubles chariot semi universel Sepalumic ferco

Franck

[Lagoon4us]

I thought you had an 'open door policy'?

[cashgar]

Did you found the roller part or manufacturer need to change my roller on my lagoon 410 2006

[coldar1]

No. I was unable to find a replacement roller so had a domestic roller door manufacturer make me some rollers. They cost only $15 each. You can look for any business that makes sliding doors for houses and they can make or supply. Good luck.

[feebs]

Lagoon have given me a price of A$280 (€180) per roller plus A$75 (€48) delivery for L400 door rollers. A little over the top, so I too will look into this with my local door guy.




Sent from my iPad using Cruisers Sailing Forum

[Nicholson58]

Don't know what they look like but I make new replacements from Nylatron round stock for pulleys & other stuff. You should be able to make wheels if you can get to a lathe. I have even done them on my ShopSmith wood Lathe but go slowly.