Hi,
Unfortunately I'm unable to post the full video which shows the full extent of the problem. There is an area of more than 200 square feet with many hundreds of
blisters. The problem doesn't involve the outer hulls, only the inner and there is nothing above the waterline. If your explanation was correct there would be areas above the waterline suffering from blisters. I suggest the anti
osmosis component was missing or defective in the build process.
The alarming thing from my point of view is that when
Lagoon were advised of the problem, they recommended simply reapplying the antifoul and put it back in the
water whilst they consider the problem. Now almost 12 months later the
boat needs to be lifted out so Lagoon were advised so they could have some input regarding the method of
repair, Its been a month and I'm still waiting for a response. if this has now compromised the integrity of the
hull as I suspect I'll be seeking a replacement.
Regards,
Mike.