Battery charger wiring
advice please. We had our Cristec 40A charger
repaired. When removing it didn't think to take pictures from below of where the various output cords plugged in.
Could someone with the same dual 40A/60A Cristec charger set-up please be able to advise on the correct outputs for the 40A.
The diagram indicates outputs K4, K5, K6, K7 and K12. So is it K4 (-BAT) to house bank and K5 (+BAT D) and K6 (+BAT 1) to engine batteries
, K7 open and K12 (+SP) to battery
Thanks in advance.