I have a 450S #6. I have went through 2 haylard lines from chafing, it comes from the structural bracing inside the mask where the Genoa
forestay and the shrouds attach. I was up on the mask looking down into the mask through a small opening and I can see the bracing down inside the mask. There are 2 sheeves avilable on the front of the mask. I have tried both but end up with the same results. I am going to obtain a endoscope and get a picture or a better look.
I am thinking that the 450S would have a differtent Mask then the F.
Was wondering if any other 450S owners have had this issue.
it is very frustrating that Lagoon
provides no customer service
when it comes to problems they have had with new designs or changes to those designs when a problem has been detected and changed.
My manual states that that haylard is a 12mm but the boat
arrived new with a 10mm. I tried a 12mm and it Chafed quickly the 10 does much better.