Yes - remove the edging above the cabins entryway. Then, starting from outside panel, pull down and release the velcro holding up the edge. You can remove that panel and it will expose the fastening screws of the next panel. remove the screws, remove the panel, and it exposed the fastening screws of the next panel. Repeat until you get to the winch
I use automobile body panel removal
tools to grab the edge of the first panel and an electric
screwdriver to remove all the screws.
I am 95% sure that you start at the outer panel. Its been a while since I did this. If not, the inner panel. Can someone recall
Also, do a search in these forums
. Panel removal
has been demonstrated.