We installed our Bauer in the stbd sugar scoop, behind the
engine. I cut and fit a 3/4"
marine plywood board as a level base, glued down with 5200, and it sits well on that. The
compressor is secured to the base with two bolts. It was a fairly easy job. A bit of wiggling to get the compressor in. Fortunately the Bauers don't need a lot of servicing but its all accessible on the front side.
We have an
electric one,
single phase
motor that runs nicely on 220V and I just
plug it into the stbd aft socket
plug next to the
bed when we need to use it. Its been a champ!
Steve
L450
SV Emerald Sea