380: 4 cabins to 3 cabins mod

[spiv]

Hi there,

anyone ever done or heard of someone modifying a 4 cabins into a 3 cabins 380, or other sizes for that matter?

I asked Lagoon for assistance, had a quick response from a customer rep who said he would chase info from the tech team, but I thought I'd ask here as well to see if what the possible problems could be.

[ShellBack89]

These two are doing it with a lagoon. Might email Ryan and ask him.

https://jessicaandryanadventures.com/

[spiv]

Originally Posted by ShellBack89

These two are doing it with a lagoon. Might email Ryan and ask him.

https://jessicaandryanadventures.com/

Thank you, had a look at their blog.
Will try to contact them.

[spiv]

Just to end this thread, Lagoon came back saying they don't know of anyone having done it and do not have any specs to help me doing it.

As expected......

[MorwrMeic]

Originally Posted by spiv

Hi there,

anyone ever done or heard of someone modifying a 4 cabins into a 3 cabins 380, or other sizes for that matter?

I asked Lagoon for assistance, had a quick response from a customer rep who said he would chase info from the tech team, but I thought I'd ask here as well to see if what the possible problems could be.

Spiv - know this is a 2008 message: did you ever do the mod?

[spiv]

Originally Posted by MorwrMeic

Spiv - know this is a 2008 message: did you ever do the mod?

Morwr,
It's not a 2008 discussion, but 2018.....
I actually just bought a 380 and I am going to modify it, starting in Late January.

[spiv]

Would anyone with an Owner version post pictures of the owners sliding door construction please?

Now that my workshop in the port hull is nearly finished, I am going to start the modifications in the starboard side and It is going to make it a lot easier for me if I can see how Lagoon builds the sliding door.

If you think the pictures are not enough, some measurements and hints will be much appreciated.

[CatNewBee]

Originally Posted by spiv

Would anyone with an Owner version post pictures of the owners sliding door construction please?

Now that my workshop in the port hull is nearly finished, I am going to start the modifications in the starboard side and It is going to make it a lot easier for me if I can see how Lagoon builds the sliding door.

If you think the pictures are not enough, some measurements and hints will be much appreciated.

The rail crossection is P-shaped the upper rail is in the middle of the ceiling, the lower part on the second step. See the pictures. The door is at an L angle upside down. Door size 74.7cm width, 163cm heigth, followed by a square wood piece. 2.5 x 2.5cm on the upper edge, the horizontal part is 55,5cm x 74.7cm. The rails are 3.4cm x 150cm.Attachment 1

[CatNewBee]

See the door locking, pull out handle, hand grip and lock, hook to keep the for open and rubber bumper to prevent the door from sliding too far.

[CatNewBee]

Door handles

[CatNewBee]

This measures and pictures are from the 400S2 owners version.

[spiv]

Originally Posted by CatNewBee

This measures and pictures are from the 400S2 owners version.

Yes, the 380 is different, the steps and the roof ceilings are different shape/size, but your pictures and dimensions are VERY helpful. thanks!!

[bmonteiro]

Looking nice! Did you finish it now? Curious to see some photos!

[montenido]

I love the workshop so far. I would LOVE to fit that on my boat!

Cheers, Bill

[spiv]

Unfortunately, the mods took longer than I anticipated, so i decided to make the boat seaworthy and spend the rest of the summer cruising.
I will continue the mods next winter.

I built a hard top and spent a lot of time straightening the bows.......