For Sale: Westerbeke Engine

[bluemoon365]

I have a Westerbeke 40 for sale.. Pulled from my 365 - has engine mounts and can be dropped in you boat. I need to pay some bills so need to move - don't want to separate any parts - all working so would be a shame to break it apart.. Thanks, Jim
- Looking for $2000 and a nice home for her. Engine mounted on pallet in Florida.
Engine info:

Hours: 1700
Reconditioned Heat exchanger

Extras: Speed Seal – Quick Change water pump">Raw water pump plate
Bomar Alternator & Power Regulator

Spares: Filters: Oil x 4
Fuel x 5
Impellers: x 3
Engine Zinc: x 6

Parts: Extra Raw water Pump
Extra Raw water pump plate & gaskets
Spare – Fuel injector
Spare – Thermostat Valve
Spare – Diesel Fuel lift Pump
Engine Belts x 6

Gaskets: Valve Cover Gasket
Oil Pan Gasket

Includes: Manuals: Technical & Parts
Reservoir tank, exhaust mixing elbow/valve, engine mounts, Clutch/Damper plate for Borg Warner Trans

[jlincoln04078]

Where in Florida is the engine located?

[firstallied]

Can you tell us what year the westerbeke is where is located and possibly show a picture. THANKS

[bluemoon365]

Sorry for the delay - I was out of town... The engine is located in Orlando... I will get pic's posted, engine is original from a 1979 Pearson 365. Well maintained..
Thanks for patients. Jim

[bluemoon365]

A couple of pic's of the engine

[bluemoon365]

And a few of the parts: D

[endoftheroad]

Now that's what I call SEXY!

[woodymr]

Very nicely done. Best Regards

[bluemoon365]

Ahoy Jeff!

I counted the teeth - "26"
The trans. plate says: Berg & Beck #5902

Hope this helps. I have been answering info on the private messaging side but not sure what is getting through..

Best of luck,

Jim

[bluemoon365]

Hope you can enlarge to see clearly - if not I am happy to drop full size picture via your direct email.

Motor mounts are 18" width and 20.25" front to rear. I have an exploded diagram with the exact foot print sizes etc. in adobi .. also available at this link :http://www.westerbeke.com/productBrochures/w40.pdf
Sorry for the delay - but really wanted to be as exact as possible for you..
Thanks,

Jim

[holeshot15]

Still Available? Can you help with shipping..

[boatman61]

Originally Posted by bluemoon365

Ahoy Jeff!

I counted the teeth - "26"
The trans. plate says: Berg & Beck #5902

Hope this helps. I have been answering info on the private messaging side but not sure what is getting through..

Best of luck,

Jim

Sure its not Borg & Beck....??

[bluemoon365]

The engine is currently available. It has been palleted which I can box and arrange shipment per your spec's. It is located in central Florida.

[bluemoon365]

It is Borg & Beck ----5902 ___ Sorry...

[s/v 'Faith']

Wow,

That is a good looking motor. Shame I did not know about this a month ago, there is a 424 sitting in Marathon that sure could have used a less expensive option.

Good luck on the sale.