This is G4 chain - I believe it is US made ACCO but cannot guarantee. I removed it from our
boat when I replaced it with 200ft of new chain.
It's roughly 140ft long and both ends are in decent shape. As usual, a section about 30ft long roughly in the center of the chain was quite corroded. To give you an idea, the links were rusted together and I had to hit the chain with a hammer to get it straightened up enough to come out the hawse. I would say those links were about 25% wasted.
So this is one continuous 140ft piece of chain with about 30ft in the middle that is in poor shape.
I believe there are at least two good end pieces of about 50ft each. I cannot cut it to length nor do I want to ship it. Asking $1 per foot, $100 for the useable portion of the 140ft long chain. I can deliver / meet you in the greater Tampa Bay area.
Linear Mode
Recent Discussions