Stove is in very good condition, no dents, clean, no abuse best I can tell. Complete with tank,
pump lines including bulk
head fitting and flex line, pot holders, gimbal kit, some spares, burner tool. I have tried to provide pictures but if you want to see something specifically or have any questions please ask.
This is what I know:
+Burners have new prickers and stem packing.
- Lower
oven burner has small leak at the packing washer where the burner attaches to the
fuel line, other burners are OK.
-Some minor rust spots on cast iron top, not visible from 2 ft away,
-Pressure gauge at tank has some staining on dial and have not verified if it reads correctly.
+Tank, lines burner valves hold pressure.
+Pump on tank works.
+Documentation including
parts drawing and instructions.
Dimensions and manufacturer information is at
Taylors 030
The
stove is located in the
SF Bay area. For actual cost, I will arrange to have it crated for
shipping, insure and ship it if you can not pick it up.
I believe that these are hard to find used. This one is in great shape and would be near perfect after some minor
work. I would rather see it go to a good home here than on e-bay. $1700 seem a reasonable
price to start at, which is less than half of getting new one over here.
Linear Mode
Recent Discussions