I have a new, never been out of the bag 150 square foot ATN Gale Sail
for sale. This has been stored in a dry
storage since new. It is new in every respect...never been hoisted and in original bag...never been untied. This size is for 44' to 52'
boat.
These sell for $1,375 at ATN, and I am asking $950.
Shipping from
Houston, TX
Email me at crew"at"svbebe.com substitute the "at" with @
Features of the GALE SAIL- High visibility Safety orange luff pouch
- Oversized piston hanks PLUS webbed grommets for easier hoisting
- It eliminates the need for a removable headstay.
- It eliminates the dangerous job of unfurling, dropping and stowing away the furled working sail to free up the roller furler in windy conditions to hoist the conventional jib.
- Since it is hoisted over the furled headsail, the Gale Sail prevents any dangerous accidental unfurling.
- No transformations or alterations of the rig are needed. The Gale Sail is ready to be hoisted immediately.
- The Gale sail, since it is hoisted over the very stiff roller furled sail, has a great aerodynamic shape, much better than a conventional storm jib hanked on a removeable headstay, or a partially furled sail, which most of the time has not been designed or built for that purpose. Also, not all roller furlers are built to reef.
- The Gale Sail slides up and down amazingly well because Dacron slides over itself very well. The next time you walk over a folded sail on deck, take notice of how slippery it is.
- It can be hoisted with the spinnaker halyard or spare jib halyard.
- It requires less halyard tension than a conventional storm jib would need since its luff (pouch) is supported by the wide forward part of the roller furled sail. By the same token, chafing is not a problem since the Gale Sail is riding on a large area. Chafing is a problem when a lot of pressure is on a small area, not when it is spread over a large surface.
Bill
BeBe
Linear Mode
Recent Discussions