Cruisers Forum
 


 
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 03-08-2016, 13:50   #1
Registered User

Join Date: Jul 2006
Location: Alameda. Ca.
Boat: Sunbird 32
Posts: 296
Fiberglass Samson C-Mist 32 double ender project in So Cal $3999.

Thanks for looking! Up for grabs is this stunning , fiberglass , Samson C-Mist 32 project for sale.
She is a rugged , Colin Archer / Westsail type Norwegian Double Ender. Full keel with a cutaway forefoot. Fully encapsulated ballast.
She was lovingly overbuilt by her first owner , who , unfortunately passed away before her completion. I bought the boat from his estate about 8 months ago.
I was told that he may have been an employee of the Westsail factory in the 70's. It would make sense , since this boat very closely resembles a Westsail 32….only way , way better. (IMHO)
I used to own a Westsail 28 and a 32, this boat is built better , much roomier , and is an absolute piece of wood making art inside.
She is also the only C-Mist I've heard of that is built of fiberglass and not Ferro Cement. Her hull is approximately 1 inch thick in most places. Extremely well done.
I have two boats , and decided that I'd rather concentrate on finishing up my other one ..so, I am reluctantly putting C-Mist up for sale. I do want her sold quick ….so I am giving her away for much less than I paid ….priced at $3999. for a quick sale.
FYI: to build a boat like this in todays money would cost over $200,000. … IF you could even find a yard to build so strong and bulletproof. She will take you anywhere in the world safely.

About the boat:
Samson C-Mist 32
LOA 32'2
LWL 27'6
Beam 11'2
Draft 5'
Displacement 18,750 lbs.
Sail Area 601 sq. ft.
Berths 6

This is a project. The hull and interior are finished , basic wiring installed . All of the incredible woodwork is done with SOLID hardwoods. No veneers anywhere. She is a work of art. There are inlaid wood mosaics all over the boat.
She has huge , integral fuel and water tanks. I am guessing at least 100 gallons each.
TONS of storage.
All foam for cushions is cut and just needs to be covered.
The tiled galley has two ice boxes …my guess is that one was for a fridge and one a freezer.
While I have owned her , I've done the following:
1.sealed up 3 holes in the hull that I deemed un-necessary
2.cleaned up years of dust
3. installed a top of the line Groco , Bronze Seacock for the galley sink drain
4.installed a bunch of interior hardware: latches , drawer pulls etc
5. cleaned and prepped the engine room for an engine. it is READY.
6. resealed the ports. you can see in the pics …there was a little bit of water leaking over the years ..but all of the wood is SOLID.
7. installed some of the brass lighting fixtures

This boat is CLEAN and NEW inside…a real stunner.
She is a BEAUTIFUL , comfortable floating home.If I were to keep her, I would install a prop shaft , put her in the water , and live aboard while completing her.

She needs: ( and does not come with)
motor and related equipment installed
mast , sails and rigging

She comes with:

A very nice , Aluminum,un-used boom
a Perkins 4-108 long block ( condition un-known …I was told it was rebuilt years ago )
a bunch of brand new , top quality hardware , Cleats , hinges , cabinet fittings etc etc.
a beautiful inlaid wood desk top for the navigation desk ( the only part of the interior NOT finished)
the original build plans
Beautiful 6 ft. long solid teak bowsprit/platform and associated hardware
enough brand new Navtech turnbuckles to rig her as a Cutter (over $3000. on their own!)

The boat is sitting on a custom made adjustable steel cradle. Very stable. You can park the boat in your backyard if you like and then sell the cradle when you launch …it is worth a few thousand to the right person.

The lazarette is a propane locker … that drains overboard
The cockpit floor is removable …engine maintenance and installation will be EASY.

Also included is a pickup truck tool box. I have been using it to keep tools and supplies in …. its yours!

She is in a boat storage yard in Gardena , California. The monthly rent is $341. The owner of the yard also owns a yacht transport company which is good for a few reasons:
1. He can move the boat if you like
2.It is the PERFECT place to "make a mess" while you finish your dream boat
3.They have TONS of old , spare boat parts lying around: masts , storage containers full of sails , anchors etc etc etc. Very Nice people. They may even let you live on the boat while you are working on it. I have spent many a night there over the last few months.

Feel free to message me or call: 650 701 6452 with any and all questions, or to schedule an appointment to see the boat.
email: lazystar@aol.com for more pictures

Surveys welcome.

thanks and GOOD LUCK!

answers to a few questions:

the hull is 100% fiberglass. The hull and cabin are fully insulated . The head area is a fiberglass molding as well…with a built in shower pan in the floor and an unused area beneath that appears to be planned to use as a gray water sump.
Ballast IS installed and fully encapsulated…so, I can't be certain what it is. My guess is lead …because the boat is built so well …and the bilges are deep …so lead is obviously more dense as well.


PRICE: i am "giving her away" for the FIRM price of $3999.
lazystar is offline  
Old 03-08-2016, 15:16   #2
Moderator
 
roverhi's Avatar

Join Date: Aug 2005
Location: Kona, Hawaii, Carlsbad, CA
Boat: 1969 Pearson 35 #108 & 1976 Sabre 28
Posts: 7,500
Send a message via Yahoo to roverhi
Re: Fiberglass Samson C-Mist 32 double ender project in So Cal $3999.

Are you sure the boat is not a Kendall, the guy that came up with the idea of building the
Atkins' thistle in frp??? The Vick's bought the molds in a tax sale and created the Westsail 32 with cabin ala Atkins' Eric.
__________________
Peter O.
'Ae'a, Pearson 35
'Ms American Pie', Sabre 28 Mark II
roverhi is offline  
Old 03-08-2016, 15:23   #3
Registered User

Join Date: Jul 2006
Location: Alameda. Ca.
Boat: Sunbird 32
Posts: 296
Re: Fiberglass Samson C-Mist 32 double ender project in So Cal $3999.

I am positive. It's a Samson C-Mist 32.
The plans are on the boat!
BTW: The Kendall 32 (not the Westsail) … may be my all time favorite boat!
Jonny
lazystar is offline  
Old 09-08-2016, 08:01   #4
Marine Service Provider

Join Date: Aug 2010
Location: north carolina
Boat: command yachtsdouglas32
Posts: 3,113
Re: Fiberglass Samson C-Mist 32 double ender project in So Cal $3999.

The interior wood finish is worth what you are asking for the boat alone..She appears to be well built good luck with the sale...
tropicalescape is offline  
Old 09-08-2016, 08:55   #5
Registered User

Join Date: Jul 2006
Location: Alameda. Ca.
Boat: Sunbird 32
Posts: 296
Re: Fiberglass Samson C-Mist 32 double ender project in So Cal $3999.

thanks!
lazystar is offline  
 

Tags
cal, fiberglass, project, samson

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: 1970 Storfidra 25 full keel double ender project in So Cal lazystar Classifieds Archive 0 04-02-2016 19:53
ID this Double Ender ... Please !! otherthan Monohull Sailboats 21 16-02-2012 03:31
Big Displacement that Is NOT a Double-Ender ? Surveyor Monohull Sailboats 48 21-12-2010 06:18
For Sale: 1977 31' Double-ender Sloop Tilloo Classifieds Archive 7 02-10-2009 02:32

Advertise Here


All times are GMT -7. The time now is 17:10.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.