Cruisers Forum

Join CruisersForum Today

Thread Tools Search this Thread Rate Thread Display Modes
Old 10-07-2012, 23:54   #1
Registered User

Join Date: Feb 2011
Location: Hood River, OR
Boat: Farrier, F-44SC, performance cruising cat
Posts: 148
Arrow Engine controls - Marpac polished cast stainless steel

I goofed and bought four dual lever engine controls thinking that I would use them on my catamaran. The cat has twin diesels and I soon realized that I would need to be an octopus to control this 44ft cat near a dock with a cross wind and a horrified audience watching from the dock. So; my stupidity, your gain. If you need reasonably priced and sturdy engine control, these things should provide good service. The have never been installed on a boat and are new old stock that I purchased form a marine hardware store. The bases are polished cast stainless steel and the throttle and shift control levers are polished stainless also. the levers the inside levers are brass as well as the plates that the cables mount to. The except standard cables. I also have the attachment hardware.

At the moment, I have them posted on e-bay here:

dual lever marine engine control | eBay

If they don't sell, maybe someone from CF could use them. Thanks,
vientoman is offline  


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Advertise Here

All times are GMT -7. The time now is 09:06.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.