I have the following items for sale
that were intended to go into a C.F. Norris designed Sampson Marine
. This was my dad's project
but he died about a year ago before his dream could be realized. All items listed below were purchased 20+ years ago but still new....never used or installed.
I would prefer to sell all items as a package but will consider some individually. All items available for considerably less than today's pricing.
- (1) Tempest 70 HP Marine diesel engine
complete with PRM 2655 gearbox
, gauges, tach, switch and keys, and Morse single
control lever.(Engine still in shipping
- Stern gear
: Prop shaft 1.5" x 9'6" overall length. Stern tube 5'10". Prop 20" dia/15 pitch
, couplings left pilot bored, right hand rotation.
- Wagner hydraulic steering
system, model N 175-1000 single
rotation. 2" bore tiller arm.
control valve (3 way).
- (16) 9" naval brass Portlights
by Den Ouden.
- (2) Skipper
- Dozens of required hull
fittings (bronze). Fullway seacocks, straight tail pieces, curved tail pieces, thru hulls, vented loops, scoop, deck
columns: (1) 6"x6"x8' and (1) 4"x4"x8'
- S.S. angle irons: (1) 4"x4"x3/8"x10'8" for engine
beds, (1) 3"x3"x1/4"x10'10" for engine room, and (1) 3"x3"x1/4"x9'5" also for engine room.
- (2) SS rods 3/4" dia x 12'7". Note: All SS is 316.
Please call with any questions you may have. Pictures of the above items available upon request. Everything listed above is currently stored in Essex, Maryland
, just outside Baltimore