Want To Buy: dinghy davits for 40' boat, yamaha 15hp 2 stroke

[1sailorgirl]

trying to get it all together to leave the dock. need davits sturdy and large enough to hold 10 ft dinghy. also looking for the yamaha for the dinghy.

[nhschneider]

I sometimes say, jokingly, that our boat was built around our davits. The builders of our boat had pads formed into the deck with heavy knees glassed to the transom for the mounting of the davits. We are delighted with them. Highly recommended.

Cooney Marine Simpson Davits

Fair winds and calm seas.

[Polar Opposite]

I have a set of nice davits as pictured. PM me if you're interested.

[Sailorman Ed]

You know how some boats can have a helicopter on the top? Well, my davits seem to be built to pick up a small sub !!

[cashgar]

I have a 15hp Yamaha 2 stroke year 2012 for sale were are you located?

[a64pilot]

I put Kato davits on mine, not inexpensive, but quality seems excellent. Kato Marine
I have 140 lbs of Solar panels on them along with my dinghy and it's 100 lb outboard, probably more weight than they would recommend, but has been fine so far.

[Sailing Serendy]

Hello
We recently put Martek davits on our Catalina 350. They are made in St Petersburg Fl. We talked with them several times before purchasing. Kevin was always available and even responded to questions eight or nine at night. Our boat is In Daytona if you ever want to see the davits. They have a 600 lb rating.
Let us know if you want to see them.

Happy sailing

[Caliber40]

Originally Posted by Polar Opposite

I have a set of nice davits as pictured. PM me if you're interested.

Hello.....what brand are they model # etc how much R u asking......where located?

Thanks

[1sailorgirl]

Port Orange just south of Daytona.

[Caliber40]

Originally Posted by 1sailorgirl

trying to get it all together to leave the dock. need davits sturdy and large enough to hold 10 ft dinghy. also looking for the yamaha for the dinghy.

Hello......have a set of Forespar Davits I think will work......can get more info if interested.......$650 plus shipping

Located in Deltaville Va

[Caliber40]

Originally Posted by 1sailorgirl

trying to get it all together to leave the dock. need davits sturdy and large enough to hold 10 ft dinghy. also looking for the yamaha for the dinghy.

Hello......have a set of Forespar Davits I think will work......can get more info if interested.......$650 plus shipping

Located in Deltaville Va

[Caliber40]

Hello......sorry just saw your post.....yes I can send a pic for you.....let me know if still interested.
Caliber40@va.metrocast.net

Thanks
Greg

[N4RNV]

I have a set I took off of my 42' Pearson the same brand as Polar Opposite's ones for $250 FOB Pensacola,FL. Will send pics if interested.

[Sheetbender]

Hi, from another ND Offshore 40 owner. My wife, Donna and I have been refurbing our Offshore 40 for a few years now. We are trying to get the boat back in the water asap. Currently changing the stand-up chart table into a sit down forward facing one. Have re-done the aft cabin, removing the veneer off the inside of the transom, re-staining the ash wood strips along the hull sides, adding insulation behind.
Removed, bladder tank and installed waste tank in hanging locker next to head. Removed all ballast and concrete mixture and replaced with solid lead. Re-painted engine, re-wired engine room, led lighted entire boat. Installed new ac units fore and aft.
The list goes on and on.
Before this we had a Morgan Out Island 41, but we did not care for the poor close quarters manuverability. We have not had this boat in the water yet. We are very curious as to the handling and seakeeping manners the boat will have. How have you found your boat to be? Donna and I would love to be able to see your boat upclose sometime before you set off.
We have our boat in our backyard in Orlando for the re-furb and will be going into a marina on the east coast as soon as we can finish up. You can e-mail us at patadon@cfl.rr.com
We wish you luck in gettin out there, as we too are almost empty nesters.

Best Wishes, Pat and Donna -
Emmanuel (1985 ND Offshore 40)